Anoher self inflicted wound

I thought that I had copied & pasted the code from this page into the 00_spa3102.xml file. I’d spent ages comparing my file with this page and not noticed that I had somehow changed :-

<action application=”bridge” data=”sofia/internal/${destination_number}

to :-

<action application=”bridge” data=”sofia/internal/$(destination_number)

With the small font that I am using on my display, I don’t think that I would ever have noticed the typo, but someone very quickly spotted my numpty mistake when I posted in on the freeswitch IRC.

What a huge difference “(” instead of “{” makes ! !

Anyway, thanks for the article, it’s working now, so off to play with the mysteries of freeswitch dialplans !

regards
Dave

thanks a lot for the reply. I found out what the problem was, self inflicted wound creating the 00_spa3102.xml file. I’ve made some prgress, but have hit a brick wall. I don’t have a VOIP supplier, I’m just setting up VOIP for internal extensions and using the SPA3102 to interface with the PSTN.

I think that I have followed then instructions as given, but can’t make outgoing calls by dialing the number. I can dial 1000 and get to the BT line, or dial O and get connected to the BT Line by freeswitch, then I can manually dial out. If I try to dial the exernal number from XLite (extension 1001), the Gateway Reports CALL_REJECTED.

(I can get incoming calls OK)

Do you have any idea where I could look to try to isolate the problem please ?
regards
Dave

I’m trying to get FreeSwitch working as you’ve described.

I seem to have a fatal problem with the 00_spa3102.xml
When I enter the file as shown, I FreeSwitch won’t start. If I rename the file until after startup and then do a reloadxml, it reports a warning
+OK [[error near line 3379]: missing >]

(I am running under windows). Any ideas what the problem might be and how I can fix it please ? I am very new to FreeSwitch, so any help would be greatly appreciated,
regards
Dave

There are plenty of helpful people over there, and they can answer your questions in real time.

There is also the mailing list of course :).

FreeSWITCH rocks!

Ive been trying to setup my voip SPA for days but still unable to make it right.

Please help me. The difference in my setup is that my SPA is natted and have private IP.

Thanks and more power

Do you know by chance how to achieve it or may be give me some recommendations how to solve this problem?

Thank you,

Svetik